|
n-Valeraldehyde |
CAS 110-62-3 | ||
CH3(CH2)3CHO |
RTECS YV3600000 | ||
Synonyms & Trade Names Amyl aldehyde, Pentanal, Valeral, Valeraldehyde, Valeric aldehyde |
DOT ID & Guide 2058 129 |
Exposure
|
NIOSH REL: TWA 50 ppm (175 mg/m3) See Appendix C (Aldehydes) | ||
OSHA PEL†: none | |||
IDLH N.D. See: IDLH INDEX | Conversion 1 ppm = 3.53 mg/m3 |
Physical Description Colorless liquid with a strong, acrid, pungent odor. |
|||
MW: 86.2 |
BP: 217°F |
FRZ: -133°F |
Sol: Slight |
VP: 26 mmHg |
IP: 9.82 eV |
|
Sp.Gr: 0.81 |
Fl.P: 54°F |
UEL: ? |
LEL: ? |
|
Class IB Flammable Liquid: Fl.P. below 73°F and BP at or above 100°F. | |||
Incompatibilities & Reactivities None reported |
Measurement Methods NIOSH 2018, 2536; OSHA 85 See: NMAM or OSHA Methods |
Personal Protection & Sanitation (See protection) Skin: Prevent skin contact Eyes: Prevent eye contact Wash skin: When contaminated Remove: When wet (flammable) Change: No recommendation Provide: Eyewash, Quick drench |
First Aid (See procedures) Eye: Irrigate immediately Skin: Soap flush immediately Breathing: Respiratory support Swallow: Medical attention immediately |
Important additional information about respirator selection Respirator Recommendations Not available. |
|
Exposure Routes inhalation, ingestion, skin and/or eye contact | |
Symptoms Irritation eyes, skin, nose, throat | |
Target Organs
Eyes, skin, respiratory system |
See also: INTRODUCTION See ICSC CARD: 1417 |