|
p-Anisidine |
CAS 104-94-9 | ||
NH2C6H4OCH3 |
RTECS BZ5450000 | ||
Synonyms & Trade Names para-Aminoanisole, 4-Anisidine, p-Methoxyaniline |
DOT ID & Guide 2431 153 |
Exposure
|
NIOSH REL: TWA 0.5 mg/m3 [skin] | ||
OSHA PEL: TWA 0.5 mg/m3 [skin] | |||
IDLH 50 mg/m3 See: 104949 | Conversion |
Physical Description Yellow to brown, crystalline solid with an amine-like odor. |
|||
MW: 123.2 |
BP: 475°F |
MLT: 135°F |
Sol: Moderate |
VP(77°F): 0.006 mmHg |
IP: 7.44 eV |
|
Sp.Gr: 1.07 |
Fl.P: ? |
UEL: ? |
LEL: ? |
|
Combustible Solid | |||
Incompatibilities & Reactivities Strong oxidizers |
Measurement Methods NIOSH 2514 See: NMAM or OSHA Methods |
Personal Protection & Sanitation (See protection) Skin: Prevent skin contact Eyes: Prevent eye contact Wash skin: When contaminated Remove: When wet or contaminated Change: Daily Provide: Quick drench |
First Aid (See procedures) Eye: Irrigate immediately Skin: Soap wash immediately Breathing: Respiratory support Swallow: Medical attention immediately |
Important additional information about respirator selection Respirator Recommendations NIOSH/OSHA Up to 5 mg/m3: (APF = 10) Any particulate respirator equipped with an N95, R95, or P95 filter (including N95, R95, and P95 filtering facepieces) except quarter-mask respirators. The following filters may also be used: N99, R99, P99, N100, R100, P100. Click here for information on selection of N, R, or P filters. (APF = 10) Any supplied-air respirator Up to 12.5 mg/m3: (APF = 25) Any supplied-air respirator operated in a continuous-flow mode (APF = 25) Any powered air-purifying respirator with a high-efficiency particulate filter. Up to 25 mg/m3: (APF = 50) Any air-purifying, full-facepiece respirator with an N100, R100, or P100 filter. Click here for information on selection of N, R, or P filters. (APF = 50) Any powered, air-purifying respirator with a tight-fitting facepiece and a high-efficiency particulate filter* (APF = 50) Any self-contained breathing apparatus with a full facepiece (APF = 50) Any supplied-air respirator with a full facepiece Up to 50 mg/m3: (APF = 1000) Any supplied-air respirator operated in a pressure-demand or other positive-pressure mode* Emergency or planned entry into unknown concentrations or IDLH conditions: (APF = 10,000) Any self-contained breathing apparatus that has a full facepiece and is operated in a pressure-demand or other positive-pressure mode (APF = 10,000) Any supplied-air respirator that has a full facepiece and is operated in a pressure-demand or other positive-pressure mode in combination with an auxiliary self-contained positive-pressure breathing apparatus Escape: (APF = 50) Any air-purifying, full-facepiece respirator with an N100, R100, or P100 filter. Click here for information on selection of N, R, or P filters./Any appropriate escape-type, self-contained breathing apparatus |
|
Exposure Routes inhalation, skin absorption, ingestion, skin and/or eye contact | |
Symptoms Headache, dizziness; cyanosis; red blood cell Heinz bodies | |
Target Organs
Blood, kidneys, liver, cardiovascular system, central nervous system |
See also: INTRODUCTION See ICSC CARD: 0971 See MEDICAL TESTS: 0015 |