International Chemical Safety Cards

IMAZALIL

ICSC: 1303

Allyl 1-(2,4-dichlorophenyl)-2-imidazol-1-ylethyl ether
1-(2-(2,4-Dichlorophenyl)-2-(2-propenyloxy)ethyl)-1H-imidazole
Enilconazole
C₁₄H₁₄Cl₂N₂O
Molecular mass: 297.2
ICSC #    1303
CAS #     35554-44-0
RTECS # NI4776000
EC #         613-042-00-5
November 25, 1998 Peer reviewed

TYPES OF HAZARD/ EXPOSURE	ACUTE HAZARDS/ SYMPTOMS	PREVENTION	FIRST AID/ FIRE FIGHTING
FIRE	Combustible. Liquid formulations containing organic solvents may be flammable. Gives off irritating or toxic fumes (or gases) in a fire.	NO open flames.	Powder, water spray, foam, carbon dioxide.
EXPLOSION

EXPOSURE
•INHALATION			Fresh air, rest.
•SKIN		Protective gloves.	Remove contaminated clothes. Rinse skin with plenty of water or shower.
•EYES	Redness. Pain.	Safety goggles.	First rinse with plenty of water for several minutes (remove contact lenses if easily possible), then take to a doctor.
•INGESTION	Nausea.	Do not eat, drink, or smoke during work. Wash hands before eating.	Rinse mouth. Refer for medical attention.

SPILLAGE DISPOSAL

STORAGE

PACKAGING & LABELLING

Sweep spilled substance into sealable containers. Carefully collect remainder, then remove to safe place. (Extra personal protection: chemical protection suit including self-contained breathing apparatus).

Provision to contain effluent from fire extinguishing. Separated from food and feedstuffs. Well closed. Keep in a well-ventilated room.

Do not transport with food and feedstuffs.
Xn symbol
N symbol
R: 20/22-41-50/53
S: 2-26-39-60-61

SEE IMPORTANT INFORMATION ON BACK

ICSC: 1303

Prepared in the context of cooperation between the International Programme on Chemical Safety & the Commission of the European Communities (C) IPCS CEC 1994. No modifications to the International version have been made except to add the OSHA PELs, NIOSH RELs and NIOSH IDLH values.

International Chemical Safety Cards

IMAZALIL

ICSC: 1303

I

M

P

O

R

T

A

N

T

D

A

T

A

PHYSICAL STATE; APPEARANCE:
LIGHT YELLOW TO BROWN CRYSTALLINE MASS (SOLIDIFIED OIL).

PHYSICAL DANGERS:

CHEMICAL DANGERS:
The substance decomposes on distillation or on burning producing toxic fumes of nitrogen oxides and chloride.

OCCUPATIONAL EXPOSURE LIMITS:
TLV not established.

ROUTES OF EXPOSURE:
The substance can be absorbed into the body by inhalation and by ingestion.

INHALATION RISK:
Evaporation at 20°C is negligible; a harmful concentration of airborne particles can, however, be reached quickly on spraying.

EFFECTS OF SHORT-TERM EXPOSURE:
The substance irritates severely the eyes.

EFFECTS OF LONG-TERM OR REPEATED EXPOSURE:
The substance may have effects on the liver , resulting in impaired functions and tissue lesions.

PHYSICAL
PROPERTIES

Boiling point: (estimated) 319-347°C
Melting point: 50°C
Relative density (water = 1): 1.2
Solubility in water, g/100 ml at 20°C: 0.14

Vapour pressure, Pa at 20°C: negligible
Flash point: 192°C
Octanol/water partition coefficient as log Pow: 4.56

ENVIRONMENTAL
DATA

The substance is very toxic to aquatic organisms. Avoid release to the environment in circumstances different to normal use.

N O T E S

If the substance is formulated with solvent(s) also consult the card(s) (ICSC) of the solvent(s). Carrier solvents used in commercial formulations may change physical and toxicological properties. Bromazil, Deccozil, Fecundal, Florasan, Freshgard, Fungaflor, Fungazil, Imaverol, Impala, Magnate, Sanazil are trade names.

ADDITIONAL INFORMATION

ICSC: 1303	IMAZALIL
(C) IPCS, CEC, 1994

IMPORTANT LEGAL NOTICE:

Neither NIOSH, the CEC or the IPCS nor any person acting on behalf of NIOSH, the CEC or the IPCS is responsible for the use which might be made of this information. This card contains the collective views of the IPCS Peer Review Committee and may not reflect in all cases all the detailed requirements included in national legislation on the subject. The user should verify compliance of the cards with the relevant legislation in the country of use. The only modifications made to produce the U.S. version is inclusion of the OSHA PELs, NIOSH RELs and NIOSH IDLH values.