International Chemical Safety Cards

METHYL ISOBUTYL CARBINOL ICSC: 0665

4-Dimethyl butan-2-ol
4-Methyl-2-pentanol
Methyl amyl alcohol
C6H14O / CH3HCOHCH2CH(CH3)2
Molecular mass: 102.2
ICSC #    0665
CAS #     108-11-2
RTECS # SA7350000
UN #        2053
EC #         603-008-00-8
October 09, 1997 Peer reviewed
TYPES OF HAZARD/ EXPOSURE ACUTE HAZARDS/ SYMPTOMS PREVENTION FIRST AID/
FIRE FIGHTING
FIRE Flammable.
NO open flames, NO sparks, and NO smoking.
Powder, alcohol-resistant foam, water spray, carbon dioxide.
EXPLOSION Above 41°C explosive vapour/air mixtures may be formed.
Above 41°C use a closed system, ventilation, and explosion-proof electrical equipment.

EXPOSURE
PREVENT GENERATION OF MISTS!

 •INHALATION Cough. Sore throat. Unconsciousness.
Ventilation, local exhaust, or breathing protection.
Fresh air, rest. Artificial respiration if indicated. Refer for medical attention.
 •SKIN Dry skin. Redness. Pain.
Protective gloves. Protective clothing.
Remove contaminated clothes. Rinse skin with plenty of water or shower. Refer for medical attention.
 •EYES Redness. Pain.
Safety goggles.
First rinse with plenty of water for several minutes (remove contact lenses if easily possible), then take to a doctor.
 •INGESTION
Do not eat, drink, or smoke during work.
Rinse mouth. Rest. Refer for medical attention.
SPILLAGE DISPOSAL STORAGE PACKAGING & LABELLING
Ventilation. Collect leaking and spilled liquid in sealable containers as far as possible. Absorb remaining liquid in sand or inert absorbent and remove to safe place. Do NOT wash away into sewer. (Extra personal protection: filter respirator for organic gases and vapours).
Fireproof if in building. Separated from strong oxidants. Cool.

Xi symbol
R: 10-37
S: 2-24/25
UN Hazard Class: 3
UN Packing Group: III
SEE IMPORTANT INFORMATION ON BACK
ICSC: 0665 Prepared in the context of cooperation between the International Programme on Chemical Safety & the Commission of the European Communities (C) IPCS CEC 1994. No modifications to the International version have been made except to add the OSHA PELs, NIOSH RELs and NIOSH IDLH values.

International Chemical Safety Cards

METHYL ISOBUTYL CARBINOL ICSC: 0665
I

M

P

O

R

T

A

N

T


D

A

T

A
PHYSICAL STATE; APPEARANCE:
COLOURLESS LIQUID.

PHYSICAL DANGERS:
The vapour is heavier than air and may travel along the ground; distant ignition possible.

CHEMICAL DANGERS:
Reacts with strong oxidants.

OCCUPATIONAL EXPOSURE LIMITS:
TLV: 25 ppm; 104 mg/m3 (as TWA); 40 ppm; 167 mg/m3 (as STEL) (skin) (ACGIH 1997).
MAK: 25 ppm; 100 mg/m3; H (1996).
OSHA PEL: TWA 25 ppm (100 mg/m3) skin
NIOSH REL: TWA 25 ppm (100 mg/m3) ST 40 ppm (165 mg/m3) skin
NIOSH IDLH: 400 ppm


ROUTES OF EXPOSURE:
The substance can be absorbed into the body by inhalation of its vapour and through the skin.

INHALATION RISK:
A harmful contamination of the air will be reached rather slowly on evaporation of this substance at 20°C.

EFFECTS OF SHORT-TERM EXPOSURE:
The substance irritates the eyes, the skin and the respiratory tract. Exposure could cause lowering of consciousness.

EFFECTS OF LONG-TERM OR REPEATED EXPOSURE:
The liquid defats the skin.
PHYSICAL
PROPERTIES
Boiling point: 132°C
Melting point: -90°C
Relative density (water = 1): 0.82
Solubility in water: 2 g/100 ml
Relative vapour density (air = 1): 3.5
Flash point: 41°C
Explosive limits, vol% in air: 1.0-5.5
Octanol/water partition coefficient as log Pow: 1.43
ENVIRONMENTAL
DATA

N O T E S
Transport Emergency Card: TEC (R)-588

NFPA Code: H2; F2; R0;
ADDITIONAL INFORMATION


ICSC: 0665 METHYL ISOBUTYL CARBINOL
(C) IPCS, CEC, 1994
IMPORTANT LEGAL NOTICE: Neither NIOSH, the CEC or the IPCS nor any person acting on behalf of NIOSH, the CEC or the IPCS is responsible for the use which might be made of this information. This card contains the collective views of the IPCS Peer Review Committee and may not reflect in all cases all the detailed requirements included in national legislation on the subject. The user should verify compliance of the cards with the relevant legislation in the country of use. The only modifications made to produce the U.S. version is inclusion of the OSHA PELs, NIOSH RELs and NIOSH IDLH values.