|
Sodium metabisulfite |
CAS 7681-57-4 | ||
Na2S2O5 |
RTECS UX8225000 | ||
Synonyms & Trade Names Disodium pyrosulfite, Sodium metabisulphite, Sodium pyrosulfite |
DOT ID & Guide |
Exposure
|
NIOSH REL: TWA 5 mg/m3 | ||
OSHA PEL†: none | |||
IDLH N.D. See: IDLH INDEX | Conversion |
Physical Description White to yellowish crystals or powder with an odor of sulfur dioxide. |
|||
MW: 190.1 |
BP: Decomposes |
MLT: >302°F (Decomposes) |
Sol: 54% |
VP: ? |
IP: NA |
|
Sp.Gr: 1.4 |
Fl.P: NA |
UEL: NA |
LEL: NA |
|
Noncombustible Solid | |||
Incompatibilities & Reactivities Heat (decomposes) [Note: Slowly oxidized to the sulfate on exposure to air & moisture.] |
Measurement Methods NIOSH 0500 See: NMAM or OSHA Methods |
Personal Protection & Sanitation (See protection) Skin: No recommendation Eyes: No recommendation Wash skin: No recommendation Remove: No recommendation Change: No recommendation |
First Aid (See procedures) Eye: Irrigate immediately Breathing: Fresh air Swallow: Medical attention immediately |
Important additional information about respirator selection Respirator Recommendations Not available. |
|
Exposure Routes inhalation, ingestion, skin and/or eye contact | |
Symptoms Irritation eyes, skin, mucous membrane | |
Target Organs
Eyes, skin, respiratory system |
See also: INTRODUCTION |