|
Phenylphosphine |
CAS 638-21-1 | ||
C6H5PH2 |
RTECS SZ2100000 | ||
Synonyms & Trade Names Fenylfosfin, PF, Phosphaniline |
DOT ID & Guide |
Exposure
|
NIOSH REL: C 0.05 ppm (0.25 mg/m3) | ||
OSHA PEL†: none | |||
IDLH N.D. See: IDLH INDEX | Conversion 1 ppm = 4.50 mg/m3 |
Physical Description Clear, colorless liquid with a foul odor. |
|||
MW: 110.1 |
BP: 320°F |
FRZ: ? |
Sol: Insoluble |
VP: ? |
IP: ? |
|
Sp.Gr(59°F): 1.001 |
Fl.P: ? |
UEL: ? |
LEL: ? |
|
Combustible Liquid | |||
Incompatibilities & Reactivities None reported [Note: Spontaneously combustible in high concentrations in air. Potential exposure to gaseous PF when polyphosphinates are heated above 392°F.] |
Measurement Methods None available See: NMAM or OSHA Methods |
Personal Protection & Sanitation (See protection) Skin: Prevent skin contact Eyes: Prevent eye contact Wash skin: Daily Remove: When wet or contaminated Change: No recommendation |
First Aid (See procedures) Eye: Irrigate immediately Skin: Soap wash Breathing: Respiratory support Swallow: Medical attention immediately |
Important additional information about respirator selection Respirator Recommendations Not available. |
|
Exposure Routes inhalation, ingestion, skin and/or eye contact | |
Symptoms In animals: blood changes, anemia, testicular degeneration; loss of appetite, diarrhea, lacrimation (discharge of tears), hind leg tremor; dermatitis | |
Target Organs
Blood, central nervous system, skin, reproductive system |
See also: INTRODUCTION See ICSC CARD: 1424 |