|
Dinitolmide |
CAS 148-01-6 | ||
(NO2)2C6H2(CH3)CONH2 |
RTECS XS4200000 | ||
Synonyms & Trade Names 3,5-Dinitro-o-toluamide; 2-Methyl-3,5-dinitrobenzamide; Zoalene |
DOT ID & Guide |
Exposure
|
NIOSH REL: TWA 5 mg/m3 | ||
OSHA PEL†: none | |||
IDLH N.D. See: IDLH INDEX | Conversion |
Physical Description Yellowish, crystalline solid. |
|||
MW: 225.2 |
BP: ? |
MLT: 351°F |
Sol: Slight |
VP: ? |
IP: ? |
|
Sp.Gr: ? |
Fl.P: NA |
UEL: NA |
LEL: NA |
|
Noncombustible Solid | |||
Incompatibilities & Reactivities None reported |
Measurement Methods NIOSH 0500 See: NMAM or OSHA Methods |
Personal Protection & Sanitation (See protection) Skin: Prevent skin contact Eyes: Prevent eye contact Wash skin: When contaminated Remove: When wet or contaminated Change: Daily |
First Aid (See procedures) Eye: Irrigate immediately Skin: Soap wash immediately Breathing: Respiratory support Swallow: Medical attention immediately |
Important additional information about respirator selection Respirator Recommendations Not available. |
|
Exposure Routes inhalation, ingestion, skin and/or eye contact | |
Symptoms Contact eczema; in animals: methemoglobinemia, liver changes | |
Target Organs
Skin, liver, blood |
See also: INTRODUCTION |