|
|
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
o-sec-Butylphenol |
CAS 89-72-5 | ||
CH3CH2CH(CH3)C6H4OH |
RTECS SJ8920000 | ||
|
Synonyms & Trade Names 2-sec-Butylphenol, 2-(1-Methylpropyl)phenol |
DOT ID & Guide |
||
Exposure
|
NIOSH REL: TWA 5 ppm (30 mg/m3) [skin] | ||
| OSHA PEL†: none | |||
| IDLH N.D. See: IDLH INDEX | Conversion 1 ppm = 6.14 mg/m3 | ||
|
Physical Description Colorless liquid or solid (below 61°F). |
|||
|
MW: 150.2 |
BP: 227°F |
FRZ: 61°F |
Sol: Insoluble |
|
VP: Low |
IP: ? |
|
Sp.Gr: 0.89 |
|
Fl.P: 225°F |
UEL: ? |
LEL: ? |
|
| Class IIB Combustible Liquid Combustible Solid | |||
|
Incompatibilities & Reactivities None reported |
|||
|
Measurement Methods None available See: NMAM or OSHA Methods |
|
Personal Protection & Sanitation (See protection) Skin: Prevent skin contact Eyes: Prevent eye contact Wash skin: When contaminated Remove: When wet or contaminated Change: No recommendation Provide: Eyewash, Quick drench |
First Aid (See procedures) Eye: Irrigate immediately Skin: Soap flush immediately Breathing: Respiratory support Swallow: Medical attention immediately |
|
Important additional information about respirator selection Respirator Recommendations Not available. |
|
| Exposure Routes inhalation, skin absorption, ingestion, skin and/or eye contact | |
| Symptoms Irritation eyes, skin, respiratory system; skin burns | |
|
Target Organs
Eyes, skin, respiratory system |
|
| See also: INTRODUCTION |