A Companion to the TABLE X |
Chemical |
CAS No. |
Recommendation for |
Recommended |
o-Xylene |
95-47-6 |
Prevent skin contact |
Contact the manufacturer for recommendations |
m-Xylene |
108-38-3 |
Prevent skin contact |
Contact the manufacturer for recommendations |
p-Xylene |
106-42-3 |
Prevent skin contact |
Contact the manufacturer for recommendations |
m-Xylene alpha,alpha'-diamine |
1477-55-0 |
Prevent skin contact |
Contact the manufacturer for recommendations |
Xylidine |
1300-73-8 |
Prevent skin contact |
Contact the manufacturer for recommendations |
Recommendations for skin protection
Prevent skin contact.... | Wear appropriate personal protective clothing to prevent skin contact. Suggested barriers for use should be confirmed with the vendor and for additional information and use limitations. |
Frostbite.................... | Wear appropriate personal protective clothing to prevent the skin from becoming frozen from contact with the evaporating liquid or from contact with vessels containing the liquid. |
N.R........................... | No specific recommendation can be made. Actual working conditions will determine the need and type of personal protective equipment. |
Bold type indicates a change from or an addition to what is published in the NIOSH Pocket Guide to Chemical Hazards, June 1997 Edition.
Recommended protective clothing barriers*
Butyl = Butyl Rubber (Gloves, Suits, Boots)Natural = Natural Rubber (Gloves) Neoprene = Neoprene Rubber (Gloves, Suits, Boots) Nitrile = Nitrile Rubber (Gloves, Suits, Boots) PE = Polyethylene (Gloves, Suits, Boots) PVA = Polyvinyl Alcohol (Gloves) PVC = Polyvinyl Chloride (Gloves, Suits, Boots) Teflon = Teflon (Gloves, Suits, Boots) | Viton = Viton (Gloves, Suits)Saranex = Saranex coated suits PE/EVAL = 4H and Silver Shield brand gloves Barricade = Barricade coated suits CPF3 = CPF3 suits Responder = Responder suits Trellchem = Trellchem HPS suits Tychem = Tychem 10000 suits |
8 hr = More than 8 hours of resistance to breakthrough >0.1 µg/cm2/min.
4 hr = At least 4 but less than 8 hours of resistance to breakthrough >0.1 µg/cm2/min.