A Companion to the TABLE I |
Chemical |
CAS No. |
Recommendation for |
Recommended |
Indene |
95-13-6 |
Prevent skin contact |
Contact the manufacturer for recommendations |
Indium |
7440-74-6 |
N.R. |
Determine based on working conditions |
Iodine |
755-35-62 |
Prevent skin contact |
8 hr: Saranex 4 hr: PE |
Iodoform |
75-47-8 |
Prevent skin contact |
Contact the manufacturer for recommendations |
Iron oxide dust and fume (as Fe) |
1309-37-1 |
N.R. |
Determine based on working conditions |
Iron pentacarbonyl (as Fe) |
13463-40-6 |
Prevent skin contact |
Contact the manufacturer for recommendations |
Iron salts (soluble, as Fe) |
Prevent skin contact |
Contact the manufacturer for recommendations for the specific compound | |
Isoamyl acetate |
123-92-2 |
Prevent skin contact |
Contact the manufacturer for recommendations |
Isoamyl alcohol (primary) |
123-51-3 |
Prevent skin contact |
8 hr: Butyl, Neoprene, Nitrile, Viton |
Isoamyl alcohol (secondary) |
528-75-4 |
Prevent skin contact |
Contact the manufacturer for recommendations |
Isobutane |
75-28-5 |
Frostbite |
Prevent possible skin freezing from direct liquid contact |
Isobutyl acetate |
11-01-90 |
Prevent skin contact |
Contact the manufacturer for recommendations |
Isobutyl alcohol |
78-83-1 |
Prevent skin contact |
8 hr: Butyl, Neoprene, Viton, Responder 4 hr: Nitrile, PE/EVAL |
Isobutyronitrile |
78-82-0 |
Prevent skin contact |
4 hr: Teflon |
Isooctyl alcohol |
26952-21-6 |
Prevent skin contact |
Contact the manufacturer for recommendations |
Isophorone |
78-59-1 |
Prevent skin contact |
8 hr: Responder 4 hr: PVA, PE/EVAL |
Isophorone diisocyanate |
4098-71-9 |
Prevent skin contact |
8 hr: Butyl, Nitrile, PVA, Viton, Responder |
2-Isopropoxyethanol |
109-59-1 |
Prevent skin contact |
Contact the manufacturer for recommendations |
Isopropyl acetate |
108-21-4 |
Prevent skin contact |
Contact the manufacturer for recommendations |
Isopropyl alcohol |
67-63-0 |
Prevent skin contact |
8 hr: Butyl, Nitrile, Viton, PE/EVAL, CPF3, Responder 4 hr: Neoprene, Teflon |
Isopropylamine |
75-31-0 |
Prevent skin contact |
8 hr: Tychem 4 hr: Teflon |
N-Isopropylaniline |
768-52-5 |
Prevent skin contact |
Contact the manufacturer for recommendations |
Isopropyl ether |
108-20-3 |
Prevent skin contact |
Contact the manufacturer for recommendations |
Isopropyl glycidyl ether |
4016-14-2 |
Prevent skin contact |
Contact the manufacturer for recommendations |
Recommendations for skin protection
Prevent skin contact.... | Wear appropriate personal protective clothing to prevent skin contact. Suggested barriers for use should be confirmed with the vendor and for additional information and use limitations. |
Frostbite.................... | Wear appropriate personal protective clothing to prevent the skin from becoming frozen from contact with the evaporating liquid or from contact with vessels containing the liquid. |
N.R........................... | No specific recommendation can be made. Actual working conditions will determine the need and type of personal protective equipment. |
Bold type indicates a change from or an addition to what is published in the NIOSH Pocket Guide to Chemical Hazards, June 1997 Edition.
Recommended protective clothing barriers*
Butyl = Butyl Rubber (Gloves, Suits, Boots)Natural = Natural Rubber (Gloves) Neoprene = Neoprene Rubber (Gloves, Suits, Boots) Nitrile = Nitrile Rubber (Gloves, Suits, Boots) PE = Polyethylene (Gloves, Suits, Boots) PVA = Polyvinyl Alcohol (Gloves) PVC = Polyvinyl Chloride (Gloves, Suits, Boots) Teflon = Teflon (Gloves, Suits, Boots) | Viton = Viton (Gloves, Suits)Saranex = Saranex coated suits PE/EVAL = 4H and Silver Shield brand gloves Barricade = Barricade coated suits CPF3 = CPF3 suits Responder = Responder suits Trellchem = Trellchem HPS suits Tychem = Tychem 10000 suits |
8 hr = More than 8 hours of resistance to breakthrough >0.1 µg/cm2/min.
4 hr = At least 4 but less than 8 hours of resistance to breakthrough >0.1 µg/cm2/min.