International Chemical Safety Cards N,N'-ETHYLENE BIS(STEARAMIDE) ICSC: 1112 1,2-Bis(octadecanamido)ethane N,N'-Ethylene distearylamide N,N'-Ethylene bis(octadecanamide) C38H76N2O2 Molecular mass: 593 ICSC #    1112 CAS #     110-30-5 RTECS # None April 08, 1997 Peer reviewed TYPES OF HAZARD/ EXPOSURE ACUTE HAZARDS/ SYMPTOMS PREVENTION FIRST AID/ FIRE FIGHTING FIRE Combustible. NO open flames. Water spray, foam, powder, carbon dioxide. EXPLOSION Finely dispersed particles form explosive mixtures in air. Prevent deposition of dust; closed system, dust explosion-proof electrical equipment and lighting. EXPOSURE PREVENT DISPERSION OF DUST!  •INHALATION Cough. Ventilation. Fresh air, rest.  •SKIN Redness. Protective gloves. Rinse and then wash skin with water and soap.  •EYES Redness. Safety spectacles. First rinse with plenty of water for several minutes (remove contact lenses if easily possible), then take to a doctor.  •INGESTION Do not eat, drink, or smoke during work. Rinse mouth. SPILLAGE DISPOSAL STORAGE PACKAGING & LABELLING Sweep spilled substance into containers; if appropriate, moisten first to prevent dusting (extra personal protection: P1 filter respirator for inert particles). Separated from strong oxidants. R: S: SEE IMPORTANT INFORMATION ON BACK ICSC: 1112 Prepared in the context of cooperation between the International Programme on Chemical Safety & the Commission of the European Communities (C) IPCS CEC 1994. No modifications to the International version have been made except to add the OSHA PELs, NIOSH RELs and NIOSH IDLH values.

International Chemical Safety Cards N,N'-ETHYLENE BIS(STEARAMIDE) ICSC: 1112 I M P O R T A N T D A T A PHYSICAL STATE; APPEARANCE: WAXY WHITE SOLID IN VARIOUS FORMS. PHYSICAL DANGERS: Dust explosion possible if in powder or granular form, mixed with air. CHEMICAL DANGERS: The substance decomposes at 260°C on heating and on burning producing toxic fumes (nitrogen oxides). Reacts with strong oxidants. OCCUPATIONAL EXPOSURE LIMITS: TLV not established. ROUTES OF EXPOSURE: The substance can be absorbed into the body by inhalation of dust. INHALATION RISK: Evaporation at 20°C is negligible; a nuisance-causing concentration of airborne particles can, however, be reached quickly if powdered. EFFECTS OF SHORT-TERM EXPOSURE: The substance slightly irritates the eyes, the skin and the respiratory tract. EFFECTS OF LONG-TERM OR REPEATED EXPOSURE: PHYSICAL PROPERTIES Decomposes below boiling point at 260°C Melting point: 135-146°C Relative density (water = 1): 0.97 Solubility in water: none Flash point: 280°C o.c. ENVIRONMENTAL DATA N O T E S Advawax, Lubrol EA and Microtomic 280 are trade names. ADDITIONAL INFORMATION ICSC: 1112 N,N'-ETHYLENE BIS(STEARAMIDE) (C) IPCS, CEC, 1994

IMPORTANT LEGAL NOTICE: Neither NIOSH, the CEC or the IPCS nor any person acting on behalf of NIOSH, the CEC or the IPCS is responsible for the use which might be made of this information. This card contains the collective views of the IPCS Peer Review Committee and may not reflect in all cases all the detailed requirements included in national legislation on the subject. The user should verify compliance of the cards with the relevant legislation in the country of use. The only modifications made to produce the U.S. version is inclusion of the OSHA PELs, NIOSH RELs and NIOSH IDLH values.