|
ISOBUTANE | ICSC: 0901 |
1,1-Dimethylethane Trimethylmethane C4H10 / (CH3)2CHCH3 Molecular mass: 58.1 (cylinder) CAS # 75-28-5 RTECS # TZ4300000 UN # 1969 EC # 601-004-00-0 November 25, 1998 Peer reviewed |
TYPES OF HAZARD/ EXPOSURE | ACUTE HAZARDS/ SYMPTOMS | PREVENTION |
FIRST AID/ FIRE FIGHTING |
FIRE |
Extremely flammable.
|
NO open flames, NO sparks, and NO smoking.
|
Shut off supply; if not possible and no risk to surroundings, let the fire burn itself out; in other cases extinguish with
water spray.
|
EXPLOSION |
Gas/air mixtures are explosive.
|
Closed system, ventilation, explosion-proof electrical equipment and lighting.
Prevent build-up of electrostatic charges (e.g., by grounding) if in liquid state.
|
In case of fire: keep cylinder cool by spraying with water.
Combat fire from a sheltered position.
|
EXPOSURE |
|
|
|
INHALATION |
Shortness of breath.
Suffocation.
|
Ventilation, local exhaust, or breathing protection.
|
Fresh air, rest.
Refer for medical attention.
|
SKIN |
ON CONTACT WITH LIQUID: FROSTBITE.
|
Cold-insulating gloves.
Protective clothing.
|
ON FROSTBITE: rinse with plenty of water, do NOT remove clothes.
Refer for medical attention.
|
EYES |
|
Safety goggles,
face shield.
|
First rinse with plenty of water for several minutes (remove contact lenses if easily possible), then take to a doctor.
|
INGESTION |
|
Do not eat, drink, or smoke during work.
|
|
SPILLAGE DISPOSAL | STORAGE | PACKAGING & LABELLING | ||
Evacuate danger area!
Consult an expert!
Ventilation.
Remove all ignition sources.
NEVER direct water jet on liquid.
(Extra personal protection: filter respirator for organic vapours of low boiling compounds).
|
Fireproof.
Cool.
|
Note: C F+ symbol R: 12 S: 2-9-16 UN Hazard Class: 2.1 |
||
SEE IMPORTANT INFORMATION ON BACK | ||||
|
|
ISOBUTANE | ICSC: 0901 |
I M P O R T A N T D A T A |
| |||
PHYSICAL PROPERTIES |
| |||
ENVIRONMENTAL DATA |
|
|||
N O T E S | ||||
Turn leaking cylinder with the leak up to prevent escape of gas in liquid state.
The measures mentioned in section PREVENTION are applicable to production, filling of cylinders, and storage of the gas.
|
ADDITIONAL INFORMATION | |||||
|
|
||||
|
|